Professional TV Mounting & Home Services

Our TV wall mounting service is tailored to your room, viewing height, and wall type. We begin with a full assessment: stud location, material (drywall, brick, concrete, plaster), screen size, weight, and optimal seating distance. Based on this, we recommend the right bracket (Fixed, Tilt, or Full-Motion) and confirm the final height and position before any drilling.

We use professional stud finders, torque-controlled drivers, and manufacturer-rated anchors. Every mount is leveled and stress-tested. If you already own a bracket, we’ll verify VESA compatibility and condition to ensure it’s safe for your TV.

• Secure fastening into studs or masonry with proper anchors.
• Neat cable routing with optional raceway or in-wall solutions.
• Precise centering aligned to furniture, fireplace, or eye level.
• Basic picture & sound tuning after mounting.
• Cleanup of dust and packaging in the work area.

For extra-large or heavy screens (75″+), we can assign a two-installer team and use heavy-duty hardware. We also mount above fireplaces (after a safety/heat check) and in tricky corners with articulating full-motion arms. Our work is covered by a 12-month labor warranty.

We’ll mount your soundbar to the TV bracket (for perfect alignment) or directly on the wall under the screen. Positioning is optimized for dialogue clarity and room acoustics, with attention to height and symmetry relative to your TV and furniture.

We connect power and HDMI/eARC or optical cables, verify lip-sync, balance left/right channels, and check loudness settings so your system sounds great the first time.

• Bracket solution for on-TV mounting (most major models).
• On-wall installation with anchors appropriate for your wall.
• Neat cable path and secure strain-relief.
• Quick guidance on eARC, CEC, and TV audio settings.

Pair it with our cable-hiding options for a minimal, showroom-clean look. We can also mount small subwoofer shelves or route power safely depending on your room layout.

Surface raceway is a quick, landlord-friendly method to hide HDMI and power cables without opening the wall. The low-profile channel adheres to the wall and can be painted to match your décor.

We measure the path, cut and miter corners, and mount the raceway so it looks straight and intentional. This option is perfect for rentals, condos, or any place where in-wall work isn’t desirable.

• Adhesive or screw-mounted channels based on surface.
• Neat terminations at TV and device cabinet.
• Optional paint touch-up (client provides paint).
• Fast install with minimal cleanup.

Combine raceway with our device mounting service for an ultra-clean floating-TV look even without in-wall wiring.

For the cleanest result, we route power and AV cables behind the wall using code-conscious pass-through kits. We scan for studs and obstructions, mark safe cutouts, and install grommets/brush plates to protect the cables and create a professional finish.

This option is ideal for feature walls and living rooms where you want a truly wireless look. We’ll discuss outlet placement and the best path to your media cabinet before cutting.

• Stud, wiring, and plumbing awareness before opening walls.
• Proper pass-through plates and strain-relief.
• Safe routing for power and low-voltage lines.
• Clean patching around the opening if needed.

Pair with a Full-Motion mount to keep cables protected while the arm extends or swivels. We’ll leave you with labeled connections and recommendations for future upgrades.

We neatly mount compact streamers or hubs behind your TV and connect them to power and HDMI. Then we handle Wi-Fi pairing, app sign-ins, and firmware updates to ensure smooth performance.

If you use a receiver or soundbar, we’ll confirm input/output routing, eARC behavior, and provide basic guidance on remote control or CEC settings so everything works seamlessly.

• Hidden brackets/straps for compact devices.
• Network setup and account logins (client credentials required).
• Best-practice cable management for airflow and serviceability.
• Quick calibration for picture mode, motion control, and brightness.

We’ll also label key cables and share a simple cheat-sheet for inputs so family members can switch sources without frustration.

We carefully remove your old TV from its mount or stand, protect the screen during handling, and place it at the curb or a designated area in your home or building.

If you need full disposal or recycling, let us know in advance so we can arrange appropriate handling based on size and building rules.

• Safe lifting and screen protection.
• Cable disconnect and coil for transport.
• Bracket removal available if you’re moving the mount.
• Optional hole patch guidance for a tidy wall.

This service pairs well with a fresh installation in the same visit, saving you time and an extra appointment.

We assemble TV stands, media consoles, cabinets, and wall shelves to manufacturer specifications. Components are checked for defects, all hardware is accounted for, and fasteners are tightened to the correct torque to avoid wobble or damage.

Where needed, we can secure tall furniture to studs with safety straps and add felt pads for floor protection. We keep packaging organized and leave the area tidy.

• Accurate alignment of doors, drawers, and shelves.
• Anti-tip safety for kids and pets (on request).
• Mounting of matching wall shelves or accessory hooks.
• Integration with your AV layout and cable paths.

This service is billed at $40/hr with clear time estimates before we start. Combine it with TV mounting for one smooth visit and a cohesive living-room setup.

Got a few small items on your list? We can patch nail holes, install anchors and hooks, hang frames and mirrors, and take care of light drywall or caulking touch-ups while we’re already on site.

We bring common anchors, screws, and hand tools; for specialty items (custom hardware, paint color matching) please have materials ready or let us know in advance.

• Picture frame and mirror hanging with leveling.
• Small drywall patches and paint touch-ups.
• Basic shelf installation with stud or anchor support.
• Minor caulking around trims or cable plates.

This service is billed at $40/hr. It’s perfect for quick punch-list fixes to finish your room after a new TV install.